This guide will work on all Xiaomi phone whether its bootloader is locked or unlocked. We tested this method on Our Mi4 and Redmi Note 3 and without any problem it works. With this method, you can quickly flash the MIUI 7 or MIUI 8 Fastboot ROM on any xiaomi phones.
![(remote: (remote:](/uploads/1/2/4/2/124228845/384560990.jpg)
All you need to install ADB drivers, Fastboot ROM, and some common sense:).Before following the below mention guide do take the full backup of your phone. And read all the steps very carefully and follow all the steps one by one on your PC. So without wasting your time lets get started. Warning: Technobuzz.net is not responsible for any damage that might happen to your phone during this process.Flash MIUI 8 Fastboot ROMNOTE: If this method will not work you,To get started, you need some file and drivers on your PC. Below are links from there you can download and install the Drivers.Download the latest Fastboot ROM for your Device.
Drivers for your Device. Just install Mi PC Suite for it. You can get it from here: – and Fastboot Installed on your PC. You can get it from here –Once the ABD and Fastboot drivers are installed, you will see fastboot/ADB folder on your C drive (C:adb). Remember this location.Flash Fastboot ROM through Command Prompt1.
Extract the MIUI Fastboot ROM.tar file that you downloaded from above. Again Extract the file you extracted until you get folder as shown in the image below.2. Now open the images folder and select all and copy paste the files to ADB Folder in C:ADB (The same folder that you created above while installing ADB and Fastboot Drivers).3.
Now Switch off your device. Boot your phone into Fastboot Mode by Pressing Volume Down + Power button at the same time.4. Connect your phone to PC with USB cable.5. Open the ADB folder, and Hold Shift + Right click to Open Command window here.6. At this time your phone is connected, and the fastboot mode is on. Type fastboot devices to check the devices is connected securely.
If it is, it will show like this.7. Then Execute in the following commands one by one.fastboot flash system system.imgPress Enterfastboot flash boot boot.imgPress Enterfastboot flash recovery recovery.imgPress Enterfastboot flash cache cache.imgPress Enter8.
If you wanna completely erase user data and make your device as a newly bought device execute the following commands after the above four commands.fastboot erase userdataPress Enterfastboot flash userdata userdata.imgPress Enter9. All done now reboot by executing the following command.fastboot rebootPress Enter10.
Your device will now reboot and should be completely back to MIUI stock as well as be unrooted.Video – Fastboot ROM on Xiaomi Phone Without Mi Flash ToolSo with this you can easily flash the MIUI 8 or MIUI 7 Fastboot ROM on Xiaomi Phone Without Mi Flash Tool. Hi Bro, it’s a good procedure but I like some others also have a lock bootloader.
I could not apply to Xiaomi for permission to unlock because my MI MAX 2 is in bootloop and I did not have the device bound to any mi acc, usb debugging not set, not on dev mode etc My MM2 was only 2 hrs old in my hands when I did updater app to upgrade to MIUI 9. It froze and bootlooped ever since. And it is an export model so I could not get any support from Xiaomi svc center.
If there is a way to unlock the BL without having to go thru’ Xiaomi’s permission, pls share with us.
Hi DA72if you are talking about devices to stop pump impellers rotating in reverse (backspinning) under reverse flow conditions, they have several uses.First they eliminate the possibility of trying to start a backspinning pump if, for example, a check valve has failed.Second, they can prevent backspin overspeeding and the impeller exploding. This could happen with staged pumps feeding a pressure vessel such as a boiler, if the next to final stage pump blew out.Third, they can prevent damage to unidirectional mechanical seals.In the majority of cases they are not necessary as very few pumps will hit overspeed under reverse flow, unless the specific speed is very high.There are probably a few cases I have overlooked.Cant think of any reasons not to fit an anti runback device other than cost, and something else to go wrong.CheersSteve.
Xiaomi’s smartphones are generally well received by the developer community so this tutorial will walk you through installing TWRP on the Redmi Note 5 Pro.To do things such as gaining root access or installing a popular modification you will first need to have TWRP on the smartphone. There are two different ways to do this though as one way is a full install while the other method is to temporarily boot into TWRP. A full install (which is what I did in the main tutorial and video) is for those who don’t mind using a custom recovery and flashing the ZIP file after booting into TWRP is required if you choose to stay on MIUI. This is ideal for people who flash things frequently.However, you may just want to temporarily boot into TWRP to flash your systemless mods (such as Magisk, SuperSU, Xposed, etc.) if you plan to continue using MIUI and also want to install the new OTA updates as quickly as possible. This method is the same except we don’t need to flash the dm-verity ZIP file since the stock kernel will overwrite the custom recovery (TWRP) when you boot back into MIUI. This method is ideal for people who want to keep the stock recovery installed so that official OTA updates of MIUI are easier to install.If you plan on using a custom ROM like LineageOS or a custom kernel then it will include support for dm-verity already and you won’t have to install the ZIP file.In order to complete the tutorial below, you're going to need some things set up ahead of time.
Please follow the guide if you haven't done so already. Then you will need to follow the guide, as well as the tutorial that shows you.You will then need to open a command prompt within the within the same folder as your ADB and Fastboot tools and execute the 'adb devices' command (without quotes) to start the ADB service. That’s the whole point. Why is it smarter/better to repeat myself on parts like ‘booting into Fastboot Mode’ when someone needs to boot into Fastboot Mode to install TWRP while someone else needs to boot into Fastboot Mode to flash a Fastboot ROM.It makes much more sense to compartmentalize each of those technical steps and then just refer back to them whenever they are needed.
Same thing with stuff like installing ADB and Fastboot tools. Why do I need to write the same 300-500 words for each tutorial (and I refer to some of these mini-guides dozens of times throughout the tutorial writing process of a smartphone) that requires it when I can just write it out once and then link back to it whenever it is needed.
In this guide you will learn on How to Flash TWRP Recovery on any Android Phone. If you are here, then you probably eager to try custom ROM or Rooting and also modding. Yes Rooting and installing Custom Recovery like TWRP or CWM will always allow you to try most of the latest released Android OS on your phone before the official Stock ROM release.Follow the below guide on how to install TWRP Recovery on any Android Phone. The procedure given below is to flash on any Android Phone, So don’t try this if you dunno what you are doing. Contents.How to Flash TWRP Recovery on any Android PhoneRooting Procedure is followed only after installing the TWRP Recovery on your Phone. If want to try only Rooting procedure, we recommend to followIf you want to unleash the full power of Android Modding, then flashing TWRP Recovery is the first priority to get all modding ability on your phone.
If you have a TWRP Recovery On any Android Phone, you can always try Custom ROM, Kernel, Xposed, Rooting, Mods, etc in few simple steps.TWRP Recovery is a Custom Recovery which is also known as TeamWin Recovery built with a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. Advantage of TWRP Recovery. You can flash Custom ROM with TWRP Recovery.
You can flash modding zip files to customize your phone. Easy to use Xposed Modules’. Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU. You can always take FULL NANDROID Backup in case of any modding or flashing. Easy access to restore the Nandroid Backup. You can flash the image file using TWRP Recovery. Can remove all bloatware using TWRP Recovery.
To underclock and overclock. You can clean Wipe, Cache, and Data. PREREQUISITE. This will work only on any Android Phone.
To flash a Custom Recovery, You need a Laptop or PC. Charge your phone to at least 70%. Take a full just in case if you need it later. Download for root and Move it to internal memory on your phone. First Download and Install the Android Kies Software:. Install the Android USB Drivers:.
Download and Extract the ODIN ZIP file on Desktop:. Download Smartphone Here. (Here you will find the list of smartphone, you can search for your phone with model name)Watch The Video On How to Install TWRP.
Either with root or without root, enabling Camera2 API on your Xiaomi device requires an unlocked bootloader. Any method you try will just fail if your phone bootloader is not unlocked officially. Unlocking bootloader is utterly easy.
![Anti Rollback Check Failed Anti Rollback Check Failed](/uploads/1/2/4/2/124228845/768642832.png)
![Anti roll wheelchair locks Anti roll wheelchair locks](/uploads/1/2/4/2/124228845/372391734.jpg)
We have wrapped up the.Before we proceed, make sure you have created a backup of all your important files and data. Despite this method is perfectly safe, we cannot guarantee anything. We have no responsibilities of any damage that might happen to your device. RequirementsYou will need the following stuff:. image (.img).
The. (zip). Any compatible USB Data cable1. No Root, No TWRP FlashingThis method requires TWRP custom recovery but we are not going to install it. We need it only for booting into custom recovery.
Again, you will have no TWRP installed at the end of this process. on your computer. Install ADB Fastboot Driver or Android Platform Tools on your computer. You may install it on drive C:adb. Enable USB Debugging on your phone. Go to Settings Additional Settings Developer Options USB Debugging.
Download and copy the TWRP image file to your ADB folder. Rename the file to twrp.img. Download ARB Bypasser and extract the zip file. You will get a dummy.img file. Copy that file to the adb folder as well. Hold down the “Shift” button your keyboard and right-click anywhere inside the ADB folder. Choose “Open Command Prompt Window here” or “Open Windows PowerShell Window here”.
Now connect your phone to your computer using the prepared USB cable. Make sure the connection type is “MTP” and is NOT “Charging”. In the Command Prompt window, type “ adb devices” (without quotes) and hit Enter key.
This asks the computer to recognize your device and to establish ADB connection. Next, type “ adb reboot bootloader“.
This will reboot your phone into fastboot mode. If your device has ARB index 4 or greater, type “ fastboot flash antirbpass dummy.img” and hit Enter.
Anti Rollback Device Direct Supply
The command order your computer to flash dummy.img file to your device through the Fastboot interface. Otherwise, skip this step and go to the next step below. Recommended reading:. Now issue the following command: fastboot boot twrp.img. This tells your computer to boot your phone using TWRP image. Your phone should now display the TWRP main menu but you may need to allow system modification at first.
Next, type “ adb pull /system/build.prop” and hit Enter. The command asks the system to download “ build.prop” file from our device to your computer. Open the “build.prop” file using a text editor of your choice (Notepad, Notepad, or Sublime). Add the following text inside that file “ persist.camera.HAL3.enabled=1” – you can copy-paste it, without quotes.
Save the file (Control+S) and close the text editor. Finally, issue the following command lines:Type and hit Enter on your keyboard. Adb push build.prop /system/adb shellcd systemchmod 644 build.propadb rebootCredit: Sahil4518 on.Alternative method:. Follow Steps 1 until Steps 12 above.
Then issue the following command:adb devicesadb shellsetprop persist.camera.HAL3.enabled 1exitadb rebootYour phone will reboot into normal mode but this time the Camera2 API has been enabled.Credit: RSubha on.As for us, this alternative method that really works.2. No Root, with TWRP. on your computer. Install ADB Fastboot Driver or Android Platform Tools on your computer. You may install it on drive C:adb. Enable USB Debugging on your phone.
Go to Settings Additional Settings Developer Options USB Debugging. Download and copy the TWRP image file to your ADB folder. Rename the file to twrp.img. Download ARB Bypasser and extract the zip file. You will get a dummy.img file. Copy that file to the adb folder as well.
Download the Camera2 API Enabler (zip) and DM-Verity No Encrypt (zip) to your phone directly. Do not need to extract the zip file.
Hold down the “Shift” button your keyboard and right-click anywhere inside the ADB folder. Choose “Open Command Prompt Window here” or “Open Windows PowerShell Window here”. Now connect your phone to your computer using the prepared USB cable.
Make sure the connection type is “MTP” and is NOT “Charging”. In the Command Prompt window, type “ adb devices” (without quotes) and hit Enter key. This asks the computer to recognize your device and to establish ADB connection.
Next, type “ adb reboot bootloader“. This will reboot your phone into fastboot mode. If your device has ARB index 4 or greater, type “ fastboot flash antirbpass dummy.img” and hit Enter.
The command order your computer to flash dummy.img file to your device through the Fastboot interface. Otherwise, skip this step and go to the next step below. Recommended reading:. Now flash TWRP using this command: fastboot flash recovery twrp.img. This instructs the computer to flash TWRP image file to the phone through the fastboot interface. The process should finish within seconds. Type “ fastboot reboot recovery” and hit Enter.
This will boot your device into TWRP. Your phone will now reboot into TWRP recovery mode.
Slide to allow system modification. By doing this, it will trigger the MIUI DM-Verity security check. Choose “ Install” from the main menu. Locate and choose the Camera2 API.zip file. Tap on it to choose it. Swipe to confirm flashing.
Wait few seconds until the process complete. Go back to the main and tap “ Install” again.
Locate and choose the DM-Verity Disabler.zip file. Tap on it to choose it. Swipe to confirm flashing. Wait few seconds until the process complete. Once done, tap “Reboot”3. With Root, with TWRP and Magisk. Follow our comprehensive.
Open up Magisk Manager app. Tap the menu icon at the top left corner of the screen. Choose “Downloads”.
Tap the Search icon. Search for “ Camera2 API“.
Tap the Download icon to start downloading. Tap “Install” then reboot.What’s next?
You can confirm whether your attempt is a success or not. Simply download the “Manual Camera Compatibility Test” app or “Camera2 Probe” app from the Play Store. You should get something like this:Credits: jhangyu on.UPDATE:Users running MIUI 10 based on Android 9.0 Pie should follow our latest guide.Do not hesitate to post a comment below. I have flashed the TWRP and install the magsik manager.
But on rebooting the phone my camera2api gets disable. Moreover even with the camera2api enabled I cannot successfully run a gcam app that works with front and back camera.After reading this article, I have check that and my anti rollback feature is at index 4. I already have TWRP in my Phone what should I do to permanently enable camera2api or disable the antiroll back feature while TWRP is already on the phone. Also can you please recommend a gcam version of app that run without any issue.